44871001TH Rev.6 4-32Oki Data CONFIDENTIAL4.REPLACEMENT OF PARTS4.2.12 Duplex Belt Assy(1) Take out the Frame-Assy-TR. (Refer to 4.2.11)(2) Remove the cassette and set the printer unit on its right side.(3) Remove the E-ring (RE4-SK) and slide the Shaft-Dup-Clutch in the direction ofthe arrow.(4) Remove the screw (Silver) and Frame-Duplex-Assy .(5) Remove the four pieces of Bearing , Roller-Feed-Duplex and Duplex-Belt .(6) Installing is performed by the inverse procedure with removing.Shaft-Dup-Clutch4.2.13 DC Motor(1) Remove the Cover Side (R). (Refer to 4.2.2)(2) Remove the screw (Silver) , and remove FG-Cable .(3) Remove four screws (Silver) , and remove PlateShield (CU) .LANACCView AView A View BView BView AView A View B
