Oki Data CONFIDENTIAL 6. MAINTENANCE MENUS44871001TH Rev.6 6-116.3 Maintenance Utility6.3.1 Maintenance UtilityThe adjustments described in table 5-1 should be made by using Maintenance Utility.The following details the utility:(1) Maintenance Utility Operating Manuals:42678801FU01 Rev.38 (Version 30.3) or higher (Japanese)42678801FU02 Rev.38 (Version 30.3) or higher (English)(2) Maintenance Utility program:Applicable operating system File name Part numberWin 2000/ XP/ Vista/ 7 (Japanese/English)MuWin.zip 42678801FW01 Rev.38(Version 1.38.0) or higherTable 5-1: Adjustment options in Maintenance UtilityOption AdjustmentSection inMaintenanceUtilityOperatingManualOperation fromoperator panel(section in thismaintenancemanual)1 BoardreplacementCopies information in the EEPROM inthe PU block, and the settings in theEEPROM in the CU block.Purpose: To copy the above data ontoa CU/PU board with which to replacethe CU/PU board for a maintenancepurpose.2.4.1.1.9 Unavailable2 SerialnumbersettingRewrites the serial number recorded inthe PU block and selects and rewritesthe printer serial number recorded inthe CU block and rewrites the outputmode recorded in it.Purpose: To configure a maintenancereplacement CU/PU board onto whichthe CU/PU board information cannotbe copied with the board replacementfunction (e.g. due to an interfaceerror).2.4.1.1.10.3 UnavailableOption AdjustmentSection inMaintenanceUtilityOperatingManualOperation fromoperator panel(section in thismaintenancemanual)3 Factory/ShippingmodeSwitches between the Factory andShipping modes.Purpose: To configure a maintenancereplacement CU/PU board onto whichthe CU/PU board information cannotbe copied with the board replacementfunction (e.g. due to an interfaceerror). The maintenance board is putto the Factory mode usually by defaultand, by using this function, must beset to the Shipping mode.2.4.1.1.10.4 6.4.2.84 ScannerboardreplacementCopies information in the EEPROM onthe scanner board.Purpose:To copy the above data ontoa scanner board with which to replacethe scanner board for maintenancepurpose.2.4.1.1.8 Unavailable5 Boardoption setupinformationChecks serial number information andthe Factory/Shipping mode.2.4.1.1.7 Unavailable6 NIC softwareupdateUpdates the NIC software. 2.4.2.2.17 Unavailable7 MACaddresssettingSets the MAC address. 2.4.2.2.5 Unavailable8 ConsumablecountermaintenancefunctionCopies the consumable counters:Image drum counterToner counterWaste Toner CounterPurpose: To copy the counter value ofeach consumable in use in the printerto use in another printer.2.4.1.2.1 Unavailable9 Send to file Send the specify file. 2.4.1.2.15 Unavailable10 Destination/PnP informa-tion setupSets and checks the printer's (CU)destination, device identification andUSB identification.2.4.1.2.9 5.4.3
