Oki Data CONFIDENTIAL44871001TH Rev.6 1-171. CONFIGURATIONFax specificationFunction DescriptionBasic FaxfunctionFAX, TEL line PSTN, PBXLine Interface RJ11 × 2 (LINE1, TEL1)External phone SupportImage Memory Size 4MB (Flash Memory)Storage capacity 200 pages (ITU-T No1 chart A4)Compatibility ITU-T T30 G3Tx, Rx Resolution Normal : 8 dots × 3.85 lines/mm (203x98dpi)Fine : 8 dots × 7.7 lines/mm (203x196dpi)Ext-Fine : 8 dots × 15.4 lines/mm (203x391dpi)Photo : 8 dots × 7.7 lines/mm (203x196dpi)Compression MH/MR/MMR/JBIGMaximum Tx, Rx width Letter sizeFAX Speed Maximum 33,600 bps (V34, V17, V29, V27ter)T.30 error correction mode(ECM)Yes (default : ON)Polling function Support as a part of F code functionF code function F code confidential box, F code bulletin boardbox (Max.20)Tx function(Send)Scan function Document size From ADF : Legal14, legal13.5, legal13, Letter, A4From Flatbed : Letter,A4*MB491+LP , MPS4700mb can use Legal13,Legal 13.5, Legal 14 in addition to above sizes.Scanning mode Normal : 8 dots × 3.85 lines/mm (203x98dpi)Fine : 8 dots × 7.7 lines/mm (203x196dpi)Ext-Fine : 8 dots × 15.4 lines/mm (203x391dpi)Photo : 8 dots × 7.7 lines/mm (203x196dpi)Densityadjustment-3, -2, -1, 0, +1, +2, +3DuplexscanningSupportJob Build SupportFunction DescriptionTx function(Send)Transmission Real-time Tx SupportMemory Tx SupportManual Tx SupportDial Direct dial Max 40 degitsGroup dial Up to 20 group (100/group)Speed dial Up to 100One touch key SupportRedial Automatic Available times, intervalManual Select from Tx History or REDIAL keyTx dial history Up to 50 recordsSender/DestinationnameTx w/ SendernameMax 3 nameDisplayDestinationon the panelDial No is displayed on the Panel.Broadcast Up to 100 destinationTx reservation (Dual access) SupportDelayed Tx (Send at specifiedtime)Up to 31 days, Up to 20F code F codeconfidentialtransmissionSupport (specify Sub-Address)F code bulletinboard pollingreceptionSupport (specify selective polling address)F code relaytransmissionN/ASecurityfunctionID checktransmissionSupportDial doublepressingSupport