Oki Data CONFIDENTIAL 3. MFP INSTALLATION44871001TH Rev.6 3-23.1 Precautions and ProhibitionWarning• Do not install the MFP in the vicinity of high temperature or fire.• Do not install the MFP at the place where a chemical reaction may take place(laboratory, etc.).• Do not install the MFP near flammable solution like alcohol, thinner, etc.• Do not install the MFP at the place where a small child can reach.• Do not install the MFP at an unstable place (unsteady frame, tilted place, etc.).• Do not install the MFP at a highly humid or dusty place or under the direct sunshine.• Do not install the MFP under the environment of sea breeze or caustic gas.• Do not install the MFP at a highly vibrating place.• When you drop the MFP or damage the cover, remove the power plug from the outletand contact the Customers’ Service Center.Electric shock, fire or injury may occur.• Do not connect the power cord, printer cable and earth wire as otherwise directed bythe Manual. A fire may break out.• Do not insert a thing in the vent hole.Electric shock, fire or injury may occur.• Do not place a cup with water on the MFP.Electric shock or fire may occur.• Do not touch the fuser unit when you open the printer cover.Burn may occur.• Do not throw the toner cartridge or image drum cartridge into fire.Burn may occur by the dust explosion.• Do not use a highly flammable spray near the MFP.Fire may break out as there are high temperature parts inside the printer.• When the cover becomes abnormally hot, a smoke arises or a strange odor comesout, remove the power plug from the outlet and contact the Customers’ Service Center.Fire may break out.• When liquid like water drops inside the MFP, remove the power plug from the outletand contact the Customers’ Service Center.Fire may break out.• When a thing like a clip drops inside the MFP, remove the power plug from the outletand take out that thing.• Do not operate or disassemble the MFP as otherwise directed in the Manual.Electric shock, fire or injury may occur.Caution• Do not install the MFP at the place where the vent hole is blocked.• Do not install the MFP on the shaggy carpet.• Do not install the MFP at the place with little draught or without ventilation like a roomwith no window.• Install the MFP away from the monitor TV.• When the MFP is to be moved, hold both ends of the printer.• This MFP weighs about 20kg and should be lifted by 2 or more persons.• When to switch the power on or while printing, do not come near the paper exit of theMFP.Injury may occur.As regards the items of caution, explain to the customer showing the items of caution of theUser’s Manual. Particularly, explain fully about the power supply cord and earth cable.
