44871001TH Rev.6 4-48Oki Data CONFIDENTIAL4.REPLACEMENT OF PARTS4.2.21 Guide Eject Lower Assy(1) Remove the Scanner unit. (Refer to 4.2.8)(2) Remove the Cover Assy Rear. (Refer to 4.2.20)(3) Remove two screws (Silver) . Remove the Cover-Eject .(At this moment, Plate-Rear is also removed.)(4) Remove two screws (Silver : 8mm) . Remove the Cover-Cassette-Rear Assyand Guide-Eject-Lower-Assy .(5) Remove the post . Remove the Separator-SB-FD .(6) Remove the Lever-Exit-Sensor and Spring-Sensor-Exit .(7) Installing is performed by the inverse procedure with removing.Note!1. Beware of not to touch the DC motor inattentively (Do not rotate motor).2. Install Cover-Cassette-Rear Assy carefully to avoid the FFC cable from beingcaught.AAFFC cable
