25USER menu (continued)Item SettingNo. Superimposed No. Superimposed Descriptiondisplay display113 MEMORY 0000 OFFSTOP 0001 ON114 REC 0000 OFFINHIBIT 0001 ON120 REC INH 0000 LIGHTLAMP 0001 FLASH121 EJECT SW 0000 RECINH 0001 OFFThe underline on the setting item denotes the initial setting.This selects whether the VTR is to stop automatically whenthe counter value reaches “0” during a fast forwarding orrewinding operation in the CTL mode.0: The VTR does not stop.1: The VTR stops automatically.1. The stop mode concerned is either the stop or the still-picture mode depending on the setup menu No. 313(AFTER CUE-UP) setting.2. When both the AUTO REW function and MEMORY functionhave been selected at the same time, the AUTO REWfunction takes precedence.This selects whether to allow (enable) or prohibit (disable) therecording of signals on the cassette tape.0: Signals can be recorded on the cassette tape when thecassette’s accidental erasure prevention mechanism is setto the recording enable position.1: Recording on the cassette tape is prohibited. In this case,the REC INH lamp on the front panel lights.For selecting whether the REC INHIBIT lamp is to flash or lightwhen the cassette has been set to the accidental erasureprevention status.0: The lamp lights.1: The lamp flashes.When ON has been selected as the setup menu item No. 114(REC INHIBIT) setting, the REC INHIBIT lamp will light all thetime regardless of what has been selected as this item’ssetting.For selecting whether to enable or disable the operation of thefront panel’s EJECT button.0: The button’s operation is disabled in the recording mode.1: The button’s operation is enabled in all modes.
