Panasonic AJ-D455 Operating Instructions Manual

Also see for AJ-D455: Menu information

36Setup menusUSER menu

(continued)Item SettingNo. Superimposed No. Superimposed Descriptiondisplay display720 EMBEDDED 0000 OFFAUD 0001 ON721 LINE CH 0000 PCMSEL 0001 AUTO722 INT SG 0000 OFF0001 ON723 DV PB ATT 0000 OFF0001 ON729 REC PT 0000 OFFMUTE 0001 ON731 REF LEVEL 0000 FS-200001 FS-180002 FS-12The underline on the setting item denotes the initial setting.This selects whether to superimpose the audio data onto theserial output.0: Data is not superimposed.1: Data is superimposed.This display will not appear unless the AJ-YA455P serial inter-face board (optional accessory) has been installed.This selects the audio output for CH1 and CH2.0: PCM AUDIO is output.1: PCM AUDIO is output in the –0.43× to 1× speed range; inall other cases, CUE is automatically output.The PCM AUDIO output CH1 and CH2 signals are outputseparately regardless of the position selected for the AUDIOMONITOR SELECT switch.This selects whether the internal signal is to be used for theaudio input signal.0: The internal signal is not selected.1: The internal signal is selected.• The internal signal has a frequency of 997 Hz.• This setting is invalid if the VIDEO INPUT switch #3 hasbeen set to DVCPRO/DV.This selects the audio output level for DV format playback.0: The audio output level is not attenuated.1: The audio output level is attenuated (reduced).For selecting whether to mute the sound at the joins betweenrecordings during DV or DVCAM cassette playback.0: The sound is not muted.1: The sound is muted.For setting the audio reference level.0: Full scale, –20 dB1: Full scale, –18 dB2: Full scale, –12 dB