Panasonic AJ-D455 Operating Instructions Manual

Also see for AJ-D455: Menu information

45Error messagesWhen a warning occurs in this unit, an error number appears at the counter display.Opening the DIAG menu will display the error description on the monitor. Also, when anabnormal operation is detected in this unit, an error number flashes on the counter display.DIAG menu This display the VTR information.VTR information includes “WARNING” information and “HOURS METER” (usage time)information. A DIAG menu appears on the monitor when the monitor is connected to theVIDEO OUT 3 connector on the connector section.Displaying the DIAG menu1 Press the DIAG button.The DIAG menu screen is displayed on the monitor, and the error number is displayedon the counter display.2 The “WARNING” information and “HOURS METER” information can be switched bypressing the cursor buttons ( , ).3 Press the DIAG button again to return to the original display.ONOFFPOWEREJECTRECPLAYDVCPRODVFFSTOPREWCTL/TC/UB/REMAINRESETCH CONDITIONLEVELHEADPHONESCH 1AUDIOREC LEVELONOFFCH 1MIXCH 2AUDIOMONITORSUPERDVCPRO/DVSDIANALOGY PB PRCMPSTS-VIDEOSDIAES/EBUANALOGREMOTELOCALMENUPAGETCPRESETFILESETDIAGVIDEO IN AUDIO INCH 2INTEXTTC1, 32“WARNING” information display• A warning message is displayed on the monitor whenever a warning occurs. Whenwarnings have not been detected, “NO WARNING” is displayed on the monitor, and “Err–”is displayed on the counter display.• When multiple warning occur, the descriptions for each warning can be checked by usingthe cursor buttons ( , ).