Panasonic AJ-D455 Operating Instructions Manual

Also see for AJ-D455: Menu information

33USER menu

Item SettingNo. Superimposed No. Superimposed Descriptiondisplay display600 PB/PR 0000 MIIIN LV 0001 B-CAM601 INT SG 0000 OFF0001 BB0002 CB602 INPUT 0000 B/WC KILL 0001 AUTO603 OUT 0000 N-VFVSYNC 0001 VF604 V-MUTE 0000 N-MUTESEL 0001 LOW_RF605 CC (F1) 0000 BLANKBLANK 0001 THRU606 CC (F2) 0000 BLANKBLANK 0001 THRU608 FREEZE 0000 FIELDSEL 0001 FRAME611 EDH 0000 OFF0001 ONThe underline on the setting item denotes the initial setting.This selects the component input signal level.0: MII level.1: ß cam level.For selecting whether an internal signal is to be generated.0: No signal is generated.1: A black burst signal is generated.2: A 100% color bar signal is generated.• The INT SG message appears for 2 seconds when recordingcommences.• If the VIDEO INPUT switch #3 is set to DVCPRO/DV, theaudio signals will also serve automatically as the internalsignals when a video signal has been selected as theinternal signal by this menu item setting.This selects color killer processing for the video input signals.0: The signals are forcibly processed as B/W signals.1: The signals are automatically processed.This selects whether to float the vertical sync position of thevideo output in order to align the video output phase with theinput in the EE/record/edit modes.0: Signals are not floated.1: Signals are floated.This selects whether the video output signal is to be mutedwhen the blank portion of the tape is detected during playback.0: No muting1: Muting (picture turns grey).This selects ON or OFF for the closed caption signal in thefirst field.0: Forced blanking performed.1: Blanking not performed.This selects ON or OFF for the closed caption signal in thesecond field.0: Forced blanking performed.1: Blanking not performed.For selecting how the still picture is to be output.0: Field output1: Frame outputWhen frame output is selected, the frame slow mode will beestablished during slow motion as well.This selects whether to superimpose EDH onto the serialoutput signals.0: EDH is not superimposed.1: EDH is superimposed.• This display will not appear unless the AJ-YA455P serialinterface board (optional accessory) has been installed.• Even when 1 (ON) has been selected, EDH is not super-imposed at the SERIAL OUT 3 connector if the SUPER ON/OFF switch is at the ON position.