37USER menuItem SettingNo. Superimposed No. Superimposed Descriptiondisplay displayA00 LOAD 0000 USER20001 USER30002 USER40003 USER5A01 SAVE 0000 USER20001 USER30002 USER40003 USER50004 LOCKEDA02 P.ON LOAD 0000 OFF0001 USER20002 USER30003 USER40004 USER5A03 MENU LOCK 0000 OFF0001 ONThe underline on the setting item denotes the initial setting.• No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are the menu items which canbe set only for USER1. They are not displayed with the USER2 – USER5 files.• No. A03 (MENU LOCK) is the menu item which can be set only for the USER2 – USER5files. It is not displayed with USER1.This selects the user file whose contents will be loaded intoUSER1.0: The USER2 file contents are loaded.1: The USER3 file contents are loaded.2: The USER4 file contents are loaded.3: The USER5 file contents are loaded.When the SET button is pressed after loading, the setting willbe stored in the memory. When the MENU button is pressed,the setting will not be changed.This selects the user file into which the USER1 settings will besaved.0: The settings are saved in USER2.1: The settings are saved in USER3.2: The settings are saved in USER4.3: The settings are saved in USER5.4: This display appears when all the user files are in thechange prohibit status.• User files whose status have been set to change prohibitcannot be selected.• When all the user files are in the change prohibit status, the“LOCKED” display appears and the contents cannot besaved.This loads the contents of the selected user file into USER1and it starts operation with the USER1 settings when thepower is turned on.0: Operation is started with the settings of the previously setuser file.1: The contents of USER2 are loaded into USER1 and opera-tion is started with the USER1 settings.2: The contents of USER3 are loaded into USER1 and opera-tion is started with the USER1 settings.3: The contents of USER4 are loaded into USER1 and opera-tion is started with the USER1 settings.4: The contents of USER5 are loaded into USER1 and opera-tion is started with the USER1 settings.This selects whether to set or release the user file (USER2 –USER5) lock mode.0: The lock is released (changes can be made).1: The lock is set (changes are prohibited).The lock cannot be set for USER1.
