47WarningPriorityHighDescriptionLowFAN STOP Error No. lights when a fan motor stops operating.VTR operationContinuedSERVO NOT LOCKED Error No. lights when servo disturbances continue for3 or more seconds during playback, recording orediting.ContinuedLOW RF Error No. lights when envelope levels approx. 1/3 thatof normal levels are detected for more than 1 sec.during playback, recording or editing.ContinuedHIGH ERROR RATE Error No. lights when the error rate increases andcorrection/interpolation is performed on either thevideo or audio playback signal.ContinuedError No. TV monitor display*E-00*(Err-00)NO RF This appears when a blank exceeding 1 second isdetected on the tape during playback. ContinuedE-09*(Err-09)E-01*(Err-01)E-10*(Err-10)E-02*(Err-02)* Displays when warning information is checked by pressing the DIAG button.AUTO OFF modeThe following error number flashes on the counter display section.VTR operationError No. TV monitor display Descriptions (VTR measures)E-20 DEW EJECTAny othernumberWhen condensation is detected, the error no. displayflashes, and the unit goes into EJECT mode. The drumrotates after the cassette tape is ejected to removecondensation.When the condensation has been removed, the error no.display disappears and the VTR may be used.1) The drum rotates as soon as condensation is detectedwhen the unit is in EJECT mode.2) When condensation is detected while a cassette tape isinserted, drum rotation stops, the cassette tape is ejectedand the drum rotation begins again.If any other number appears frequently, ask your dealer toinspect the unit.