30Setup menusUSER menuItem SettingNo. Superimposed No. Superimposed Descriptiondisplay display400 STILL 0000 0.5sTIMER 0001 5s0002 10s0003 20s0004 30s0005 40s0006 50s0007 1min0008 2min401 SRC 0000 STEPPROTECT 0001 HALF402 DRUM 0000 OFFSTDBY 0001 ON403 STOP 0000 STEPPROTECT 0001 HALF404 DV STILL 0000 0.5sTMR 0001 5s0002 10s0003 20sThe underline on the setting item denotes the initial setting.In order to protect the tape and VTR helical heads, it is recommended that the Still Timer beset for automatic tape protection mode in 20 seconds or under.This selects the length of time until tape protection mode isestablished when a DVCPRO tape is inserted and the unit isin STOP or STILL mode.(Unit: s = second, min = minute)This selects the operation during the tape protection modewhen the unit is left standing in the still status.0: STEP FWD.1: HALF LOADING.When STEP FWD is selected, operation will be automaticallytransferred to the standby OFF (half loading) mode as soon asthe unit has been left standing in the STILL mode for a total of30 minutes (or 1 minute for DV/DVCAM cassette).This selects the drum operation in the STANDBY OFF mode.0: The drum stops rotating.1: The drum continues rotating.This selects the operation in the tape protection mode whenthe unit has been left standing in the STOP mode.0: STEP FWD1: HALF LOADINGWhen STEP FWD is selected, operation will be automaticallytransferred to the standby OFF (half loading) mode as soon asthe unit has been left standing in the STOP mode for a total of30 minutes (or 1 minute for DV/DVCAM cassette).This selects the length of time until tape protection mode isestablished when a DV/DVCAM tape is inserted and the unitis in STOP or STILL mode.(Unit: s = second)When using the unit in tempuratures below 59°F (15°C), setthis item to 10 seconds to protect the tape and video heads.
