27USER menuItem SettingNo. Superimposed No. Superimposed Descriptiondisplay display303 STD/ 0000 AUTONON-STD 0001 STD0002 N-STD304 SERVO 0000 AUTOREF 0001 EXT305 EDIT 0000 N-DEFRPLCE1 0001 CH10002 CH20003 CH1+2306 EDIT 0000 N-DEFRPLCE2 0001 CH10002 CH20003 CH1+2307 EDIT 0000 N-DEFRPLCEC 0001 CH10002 CH20003 CH1+2309 AUD EDIT 0000 CUTIN 0001 FADE310 AUD EDIT 0000 CUTOUT 0001 FADEThe underline on the setting item denotes the initial setting.This selects STD or NON-STD in accordance with the com-posite input signal.0: Standard/non-standard signals are automatically identifiedand processed.1: Standard signals are processed. (Forced STD)2: Non-standard signals are processed. (Forced NON-STD)This selects the video signal processing.0: Servo is synchronized with the input signal during recordingand editing, or with the REF signal during playback.1: Servo is synchronized at all times with the REF signal.This sets the channel assignments for the controller’s analogaudio preset when editing the digital audio of the VTR using acontroller which does not have a digital audio edit presetcontrol function.This selects the channel concerned when the VTR CH1 editpreset is set in compliance with the ON or OFF presetting forthe analog audio signals designated by the controller.0: Not set.1: Compliance with analog CH1 edit preset.2: Compliance with analog CH2 edit preset.3: Compliance with either analog CH1 or CH2 edit preset.This sets the channel assignments for the controller’s analogaudio preset when editing the digital audio of the VTR using acontroller which does not have a digital audio edit presetcontrol function.This selects the channel concerned when the VTR CH2 editpreset is set in compliance with the ON or OFF presetting forthe analog audio signals designated by the controller.0: Not set.1: Compliance with analog CH1 edit preset.2: Compliance with analog CH2 edit preset.3: Compliance with either analog CH1 or CH2 edit preset.This sets the channel assignments for the controller’s analogaudio preset when editing the digital audio of the VTR using acontroller which does not have a digital audio edit presetcontrol function.This selects the channel concerned when the VTR CUE editpreset is set in compliance with the ON or OFF presetting forthe analog audio signals designated by the editor or controller.0: Not set.1: Compliance with analog CH1 edit preset.2: Compliance with analog CH2 edit preset.3: Compliance with either analog CH1 or CH2 edit preset.This selects the connection method for the digital audio edit INpoint.0: Cut processing1: V Fade processingThis selects the connection method for the digital audio editOUT point.0: Cut processing1: V Fade processing
