104 Adjustments and Settings for Recording: Chromatic Aberration Compensation (CAC)1 Insert the SD memory card with the CAC filedownloaded from our support website.For downloading, refer to the following URL.https://eww.pavc.panasonic.co.jp/pro-av/2 Open the screen from theFILE page via the menu operation.3 Select TITLE READ using the jog dial button and thenpress the jog dial button.The lens product number is indicated in the TITLEcolumn.4 Select CARD FILE SELECT using the jog dial buttonand then press the jog dial button.5 Select the TITLE No. to be read and press the jog dialbutton.6 Select READ using the jog dial button and then pressthe jog dial button.The following screen is displayed.7 Select YES using the jog dial button and then press thejog dial button.The CAC file for the lens selected in step 4 is recordedin memory on the unit.If EMPTY is selected in MEM STORE NO.: EMPTY/1/2... at this time, data are recorded in available space ofthe CAC file numbers on the unit. If “1” is selected, thedata will overwrite the contents of CAC file No. 1.If the following messages are displayed when the jogdial button is pressed, the data cannot be read out.8 To store multiple CAC files in the unit, repeat steps 3 to7.9 To close the menu operation, press the MENU button.The setting menu disappears, and the current state ofthe unit is displayed.¡Notesy The unit is capable of recording 32 CAC files. When theCAC file is full, delete any of the CAC files.y While the SD memory card is inserted, the busy lamp forthe SD memory card blinks, which is normal and not amalfunction.To read the CAC FILE from an SD memory cardError message MeasuresREAD NGNO CARD(No SD memory card isinserted)Insert an SD memory card.READ NGNO FILE(No file is available)Select a file containing data andperform the read operationagain.READ NGERROR(Data cannot be read out)Insert an SD memory cardagain, and then perform theread operation again.READ NGCANNOT ACCESS(It is impossible to access thedata)It is impossible to access the SDmemory card while the card is inuse. After completion of therespective operations, performthe read operation again.READ NGFILE DATA INVALID(File data are abnormal)The written file data have errors.Use the proper file data.READ NGFILE MEMORY FULL(Memory is full)The memory is full, and newdata cannot be written on it.Delete unnecessary CAC dataand then perform the writeoperation again.
