169Menu: Menu Description TablesMenuHD SDI A · B OUT MARKERItems/Data SavedAdjustableRange RemarksMARKER SW ONOFFSwitches the marker on and off.– C U F RCENTER MARK OFF1234Switch the center mark.OFF: Do not display center mark.1: + (large)2: Hollow (large)3: + (small)4: Hollow (small)– C U F RSAFETY MARK OFF12Select the frame type for the safety zone.OFF: Do not display frame.1: Box2: Corner frame– C U F RSAFETY AREA 80%:90%:100%For setting the size of the safety marker.It is possible to set the size by units of1% with a fixed ratio between of widthand height.– C U F RFRAME MARK ONOFFSet the frame marker to “ON” or “OFF”.– C U F RFRAME SIG 4:313:914:9VISTACNSCOSet the frame marker.The VISTA ratio is 16:8.65.The CNSCO ratio is 16:6.81.– C U F RUSER BOX ONOFFFor setting whether to include the userbox in the signal from the HD SDI A · Bconnector.– C U F RUSER BOXWIDTH1:13:100For setting the width of the user box.– C U F RUSER BOXHEIGHT1:13:100For setting the height of the user box.– C U F RUSER BOX HPOS–50:+00:+50For setting the horizontal position of theuser box center.– C U F RUSER BOX VPOS–50:+00:+50For setting the vertical position of theuser box center.– C U F RMONI OUT MARKERItems/Data SavedAdjustableRange RemarksCENTER MARK OFF1234Switch the center mark.OFF: Do not display center mark.1: + (large)2: Hollow (large)3: + (small)4: Hollow (small)– C U F RSAFETY MARK OFF12Select the frame type for the safety zone.OFF: Do not display frame.1: Box2: Corner frame– C U F RSAFETY AREA 80%:90%:100%For setting the size of the safety marker.It is possible to set the size by units of1% with a fixed ratio between of widthand height.– C U F RFRAME MARK ONOFFSet the frame marker to “ON” or “OFF”.– C U F RFRAME SIG 4:313:914:9VISTACNSCOSet the frame marker.The VISTA ratio is 16:8.65.The CNSCO ratio is 16:6.81.– C U F RUSER BOX ONOFFFor setting whether to include the userbox in the signal from the MON OUTconnector.– C U F RUSER BOXWIDTH1:13:100For setting the width of the user box.– C U F RUSER BOXHEIGHT1:13:100For setting the height of the user box.– C U F RUSER BOX HPOS–50:+00:+50For setting the horizontal position of theuser box center.– C U F RUSER BOX VPOS–50:+00:+50For setting the vertical position of theuser box center.– C U F R
