170 Menu: Menu Description TablesLCD MONITORItems/Data SavedAdjustableRange RemarksBRIGHTNESS –7:+0:+7Adjust the LCD monitor brightness.– C U F –COLOR LEVEL –7:+0:+7Adjust the LCD monitor chroma level.– C U F –CONTRAST –7:+0:+7Adjust the LCD monitor contrast.– C U F –BACKLIGHT NORMALHIGHAdjust the backlight.NORMAL:Mode normally usedHIGH: This is brighter than NORMAL.– C U F –SELF SHOOT NORMALMIRRORSelect whether or not to change the LCDmonitor to mirror image.NORMAL:Do not change to mirror image.MIRROR:Change to mirror image.– C U F –GENLOCKItems/Data SavedAdjustableRange RemarksGENLOCK INTEXTSwitch the camera synchronizing signal.INT: Synchronize with the internalreference signal regardless ofthe reference signal input to theGENLOCK IN connector.EXT: Synchronize with the referencesignal input to the GENLOCK INconnector.– C U F RGL PHASE HD SDICOMPOSITFor selecting the output signals that lockphases to the signals that are input in theGENLOCK IN connector. Note, however,that in 1080-23.98PsF mode and 1080-24PsF mode, the phase is locked to HDSDI even if “COMPOSIT” has beenselected.HD SDI:For locking the HD SDI outputsignals to the GENLOCK input.For the down converter outputsignals, the start position of thevideo delays by about 90 lines.COMPOSIT:For locking the down converteroutput signals to the GENLOCKinput.For the HD SDI output signals,the start position of the videogains by about 90 lines.– C U F RH PHASECOARSE–100:+000:+100Perform coarse phase adjustment forhorizontal hold when configuring asystem.– – – – –H PHASE FINE –100:+000:+100Perform fine phase adjustment forhorizontal hold when configuring asystem.– – – – –1394 SETTINGItems/Data SavedAdjustableRange Remarks1394 SPEED S100S200S400For setting the transfer rate of signalsoutput from the DVCPRO connector.S100: 100 MbpsS200: 200 MbpsS400: 400 Mbps– C U F –1394 IN CH 0:63AUTOFor setting the input channel of signalsinput to the DVCPRO connector.0 - 63: To fix to the designated valueAUTO: To follow the settings of theexternally connected devices– C U F –1394 OUT CH 0:63AUTOFor setting the output channel of signalsoutput from the DVCPRO connector.0 - 63: To fix to the designated valueAUTO: To follow the settings of theexternally connected devices– C U F –1394 CONTROL OFFBOTHFor setting the control for recording start/stop operations of external devices thatare connected to the DVCPROconnector.OFF: Do not control the externallyconnected devices.BOTH: To control both the unit and theexternally connected devices– C U F –1394 CMD SEL REC_PSTOPFor setting the control of recording stopoperations of the external devices thatare connected to the DVCPROconnector.REC_P: Operation to pause recordingSTOP: Stopping operation– C U F –Items/Data SavedAdjustableRange Remarks
