145Connection with external device: Connection with external devices using the USB 2.0 portConnection with external device8. MODELThis section indicates the model of the P2 card thatoriginally contained data on the partition.¡NotePress the cursor button (Z) to switch to the PARTITIONNAME. Press the [Y] button to return to the originalmodel name display.Enter the PARTITION NAME from the soft keyboard byselecting CHANGE PARTITION NAME in theOPERATION menu while the thumbnail of the hard diskdrive is displayed. (Max. 20 characters)9. DATE/TIMEThis section indicates the date and time the data on thepartition was recorded.10. SERIALThis section indicates the serial number of the P2 cardthat originally contained the data on the partition.11. VERIFYThis section indicates the verification setting and resultsat the time the data on the partition was recorded.ON/FINISHED:Verification was performed and the results agreed.ON/FAILED:Verification was performed and the results did notagree.OFF:No verification was performed.- - -:No verification information is available.¡Notesy Even for a FAT-type hard disk drive, the 1001st orlater clips are not shown.y For a FAT-formatted hard disk drive, the informationabout only the first partition is shown.y For a P2 STORE (AJ-PCS060G) that has an invalidpartition, that partition information is shown in gray.12. NAMEThis section indicates the PARTITION NAME.1 Switch the mode to USB HOST.For more information, see [Switching to the USB HOSTmode] (page 143).2 Connect the hard disk drive via USB.3 Press the THUMBNAIL button to display the thumbnailscreen.4 Press the THUMBNAIL MENU button and select HDD EXPLORE from the thumbnail menu. The displayprovides a screen that shows the information about thehard disk drive.5 From the menu, select OPERATION FORMAT (HDD)and select YES using the cursor buttons and SETbutton. Then, the confirmation message is displayedagain. Select YES.6 The unit starts formatting the hard disk drive. Onceformatted, the hard disk drive can be treated as aTYPE S HDD.¡NoteFormatting a hard disk drive erases all contents of it.Note that you cannot erase the contents of certainpartitions by specifying them.Formatting a hard disk drive
