173Menu: Menu Description TablesMenu¡Notesy The items indicated by are the setting items for PAINTMENU SW() R/W in the screen. The items without are the setting items forPAINT MENU LEVEL R/W.Please refer to [SD CARD R/W SELECT] (page 195) formore information.Items/Data SavedAdjustableRange RemarksR(PHASE)–63:+00:+63For performing the hue correction forred.S C U F RR-Mg(PHASE)–63:+00:+63For performing the hue correctionbetween red and magenta.S C U F RMg(PHASE)–63:+00:+63For performing the hue correction formagenta.S C U F RMg-B(PHASE)–63:+00:+63For performing the hue correctionbetween magenta and blue.S C U F RB(PHASE)–63:+00:+63For performing the hue correction forblue.S C U F RB-Cy(PHASE)–63:+00:+63For performing the hue correctionbetween blue and cyan.S C U F RCy(PHASE)–63:+00:+63For performing the hue correction forcyan.S C U F RCy-G(PHASE)–63:+00:+63For performing the hue correctionbetween cyan and green.S C U F RG(PHASE)–63:+00:+63For performing the hue correction forgreen.S C U F RG-Yl(PHASE)–63:+00:+63For performing the hue correctionbetween green and yellow.S C U F RYl(PHASE)–63:+00:+63For performing the hue correction foryellow.S C U F RYl-R(PHASE)–63:+00:+63For performing the hue correctionbetween yellow and red.S C U F RCOLORCORRECTONOFFFor switching on/off of the 12-axisindependent color correction of theposition selected with the GAIN switch([L], [M], [H]).S C U F RLOW SETTINGItems/Data SavedAdjustableRange RemarksMASTER GAIN –3dB:0dB:30dBSelect the master gain from –3, 0, 3, 6,9, 12, 15, 18, 21, 24, 27, or 30 dB.S C U F RH.DTL LEVEL 00:05:63For performing the horizontal detailcorrection level setting.S C U F RV.DTL LEVEL 00:07:31For performing the vertical detailcorrection level setting.S C U F RDTL CORING 00:04:60For performing the noise eliminationlevel setting for detail.S C U F RH.DTL FREQ. 00:18:31For performing the horizontal detailfrequency selection.S C U F RLEVEL DEPEND. 01:5For setting the LEVEL DEPEND.When the Y-detail is emphasized, detailsof dark sections are compressed.If the numerical value is larger, details ofbright sections are also compressed.S C U F RMASTERGAMMA0.30:0.45:0.75For setting the master gamma. (0.01step)S C U F RBLACK GAMMA –8:OFF:+8For setting the gamma curve for the darkportion.–8 to –1: The dark portion is compressed.OFF: Standard state+1 to +8: The dark portion is extended.S C U F RB.GAMMARANGE123For setting the upper limit ofcompression/expansion.1: Approximately 20%2: Approximately 30%3: Approximately 40%S C U F RMATRIXTABLEOFFABFor selecting the color correction tablefor the linear matrix.S C U F RCOLORCORRECTONOFFFor switching on/off of the 12-axisindependent color correction.S C U F R
