144 Connection with external device: Connection with external devices using the USB 2.0 portYou can view the information on the hard disk driveconnected via USB 2.0 with the following steps.1 Switch the mode to USB HOST. For more information,see [Switching to the USB HOST mode] (page 143).2 Connect the hard disk drive to the unit via USB 2.0.3 Press the THUMBNAIL button to display the thumbnailscreen.4 Press the THUMBNAIL MENU button and select HDD EXPLORE from the thumbnail menu. The screenprovides the information about the hard disk drive.For TYPE S or P2 STOREFor the FAT1. PARTITIONThis section indicates the type of the hard disk drive.The available functions depend on the type of hard diskdrive.2. VENDORThis section indicates the vendor for the hard disk drive.3. MODELThis section indicates the model of the hard disk drive.4. SIZEThis section indicates the total storage on the hard diskdrive.5. USEDThis section indicates the used space on the hard diskdrive (in GB) and the number of P2 cards in use.6. REMAINThis section indicates the remaining free space on thehard disk drive in GB.7. NO.This section indicates the partition number (one P2 cardis used as a unit) on the hard disk drive.¡NoteThe screen indicates up to 10 partitions. When thenumber of partitions exceeds 10, scroll down theindication with the cursor button (V) to view the hiddenpartitions.Viewing hard disk drive information59123467 8111012EXIT button Press the SET button.1234HDD type Feature Available functionsTYPE S A special format thatallows high-speedwriting and writing backon a card-by-card basis.A drive formatted withthe unit uses this format.Thumbnail viewing,writing and writing backon a card basis, writingback on a clip basis, andformattingP2STORE P2 STORE (AJ-PCS060G). No writingcan be performed.Thumbnail viewing,writing back on a cardbasis, and writing backon a clip basisFAT For a hard disk drivewith the first primarypartition formatted inFAT16 or FAT32, asseen on PC, etc., whichrequires a CONTENTSdirectory at its root.Thumbnail viewing,reading on a clip basis,and formatting* Once formatted, thehard disk drive can betreated as a TYPE SHDD.OTHER Hard disk drives notdescribed above.* They are hard diskdrives that have noCONTENTS directoryor use the NTFS andany other file systeminstead of FAT16 orFAT32.Formatting* Once formatted, theycan be treated as aTYPE S HDD.
