65Adjustments and Settings for Recording: Setting Time DataAdjustments and Settings for Recording1 Position the DISPLAY switch at [UB].2 Press the HOLD button to display DATE in the displaywindow.3 Position the TCG switch at [SET].4 Use the cursor and SET buttons to set the year, monthand day (Y/M/D).Note that any later than 2030 cannot be set.Z button:Shifts the target (blinking) digit to the right.Y button:Shifts the target (blinking) digit to the left.U button:Advances the blinking number by one digit.V button:Winds back the blinking number by one digit.5 Press the HOLD button to display TIME in the displaywindow.6 Use the cursor buttons to set the hour, minute andsecond (h/min/s).7 Position the TCG switch at [F-RUN] or [R-RUN]. Theinternal clock starts at the moment the switch position ischanged.8 Press the HOLD button to display a time zone (timedifference between local time and Greenwich MeanTime) in the display window.9 Position the TCG switch at [SET].10 Use the U and V buttons to set the desired hours andminutes ahead of (no sign) or behind (– sign) theGreenwich Mean Time.Example: If the local time is 5 hours behind GreenwichMean Time, set the time zone to “5:00 –”.The time zone is always recorded, together with thedate and time, as metadata.See the table at right to set the time zone according toyour local time.11 Position the TCG switch at [F-RUN] or [R-RUN] toaccept the time zone.¡Notesy When using the unit for the first time, be sure to performthis setting beforehand. Do not change the setting duringuse of the unit.y When the TCG switch is positioned at [SET], thumbnailscannot be manipulated.¡Notesy In step 4, if the TCG switch is positioned at [F-RUN] or [R-RUN], this also activate the internal clock.To cancel date, time and time zone settings in process,hold down the SET button and position the TCG switch at[F-RUN] or [R-RUN].y Clock accuracy fluctuates between about ±30 seconds permonth when the power is turned off. If more accuratetimekeeping is required, check the time when the power isturned on and, if necessary, reset the clock.When the GPS unit AJ-GPS910G is installed, and if itsuccessfully receives time information, the internal clockkeeps accurate (local) time based on the received time(Greenwich Mean Time) and the time zone. If the date andtime differ from the actual local time, the time zone maynot be set correctly. Check again, to see if the time zone isset correctly. (The date and time need not be set again.)y The built-in clock operates for several years on a lithiumbattery built into the unit. When the lithium battery isexhausted, the viewfinder indicates the message“BACKUP BATT EMPTY” when the power is turned on.For more information, see [Maintenance] (page 150).Setting the Internal Clock’s Date and TimeTimedifference Area Timedifference Area00:00 Greenwich –12:00 Kwajalein+00:30 –11:30+01:00 Central Europe –11:00 Midway Island+01:30 –10:30+02:00 Eastern Europe –10:00 Hawaii+02:30 –09:30 Marquesas Islands+03:00 Moscow –09:00 Alaska+03:30 Tehran –08:30+04:00 Abu Dhabi –08:00 Los Angeles+04:30 Kabul –07:30+05:00 Islamabad –07:00 Denver+05:30 Bombay –06:30+06:00 Dacca –06:00 Chicago+06:30 Yangon –05:30+07:00 Bangkok –05:00 New York+07:30 –04:30+08:00 Beijing –04:00 Halifax+08:30 –03:30 Newfoundland Island+09:00 Tokyo –03:00 Buenos Aires+09:30 Darwin –02:30+10:00 Guam –02:00 Mid-Atlantic+10:30 Lord Howe Island –01:30+11:00 Solomon Islands –01:00 Azores Islands+11:30 Norfolk Island –00:30+12:00 New Zealand+12:45 Chatham Islands+13:00