Section 700 - Operation Chapter 5. Key Telephone Features576-20-700 DBS 576 (USA), issued January 1999 125OperationTo call an attendant group:Hardware Requirements• N/ARelated Programming• FF1-2: Dial Plan• FF3: Extension Number• FF5-0: Attendant Hunt GroupsConsiderations• Up to 20 extensions can be included in an attendant group.• The attendant pilot number is flexible.• If a member of an attendant group is for a virtual extension, multiple extensions in the attendantgroup can be made to ring at once when the virtual number is dialed.Auto Repeat DialCPC-96, CPC-288, and CPC-576 All VersionsDescriptionIf you press the REDIAL key while receiving busy tone on an outside call, the System automaticallyredials the number. The System continues to redial the number at set intervals until the called numberanswers, the caller hangs up, or the maximum of 15 redial attempts is made.OperationTo use Auto Repeat Dial:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the attendant pilot number (default = 0). Call Attendant displaysAction Result1. Press the ON/OFF key. Intercom dial tone2. Press a vacant CO key or enter a trunk access code CO Key LED lights3. Dial the phone number. • Dialed phone number displays• Busy tone4. Press the REDIAL key. System automatically redials number
