60 DBS 576 (USA), issued January 1999 576-20-700Chapter 3. System Features Section 700 - Operation• Network paging• Network call routing• Tandem callingFor more information on System Networking, see the System Networking Reference Manual.Network Call TransferNetwork Call Transfer allows a call at an extension to be transferred to another extension in thenetwork.Network Centralized AttendantCPC-96, CPC-288, and CPC-576 Version 2.1Network Centralized Attendant allows one primary attendant group in the network to handle networkattendant calls.Network Centralized Voice MailCPC-96, CPC-288, and CPC-576 Version 2.1Network Centralized Voice Mail allows one primary voice mail system to support the network.Network Extension CallingNetwork Extension Calling allows you to reach an extension on another PBX. Based on the numberyou dial, the System network routes the call automatically.Network PagingNetwork Paging allows users on one System to page on another System when the appropriate Class ofService (COS) allows.Network Call RoutingNetwork Call Routing allows multiple systems that are interconnected in a network, to direct calls to aspecific tie line based on the number dialed. The call does not leave the network.Tandem ConnectionTandem Connection allows calls that are received over the network tie lines to be automatically routedon to another PBX or out to the public network.Hardware Requirements• T1 or E&M CardRelated Programming• FF6: ARS/TRSConsiderations• N/A