Panasonic DBS576 Section 700 Technical Manual

Also see for DBS 576 Section 300: User guide Technical manual Technical manual Technical manual User guide

Contents

Panasonic DBS576 Section 700 Technical Manual Manual pdf 245 page image

Section 700 - Operation Chapter 6. DSLT Features576-20-700 DBS 576 (USA), issued January 1999 245To cancel DND for another extension:Hardware Requirements• N/ARelated Programming• FF1-0-03: Extension COS (Manual DND Override Send)• FF1-0-03: Extension COS (Forced DND Override)• FF1-0-03: Extension COS (DND Set/Clear)• FF1-0-03: Extension COS (DND Set/Clear Other)• FF1-2: Dial Plan• FF3: Extension COSConsiderations• Forced DND override is available.• DND override function is available by Busy Override code.DP to DTMF Signal ConversionCPC-96, CPC-288, and CPC-576 All VersionsDescriptionDial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch fromDP to DTMF signaling when using a DP trunk. For instance, if you dial into a Voice Mail systemusing a DP trunk, you can switch to DTMF signaling to communicate with the Voice Mail system.(The System can automatically change DP to DTMF tones based on the incoming and outgoingtimers).OperationTo switch from DP to DTMF dialing:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the DND Cancel by Other Phone code (default = 750).3. Dial the extension number.4. Replace the handset or press the ON/OFF key.Action Result1. Press the * key or the # key.