Section 700 - Operation Chapter 4. User Maintenance576-20-700 DBS 576 (USA), issued January 1999 87Hardware Requirements• N/ARelated Programming• N/AConsiderations• N/ASet System Speed Dial NamesDescriptionFor a description of System Speed Dial (SSD), see “System Speed Dial” on page 194 for a DigitalKey Telephone, “System Speed Dial” on page 256 for a Digital Single Line Telephone (DSLT), and“System Speed Dial” on page 302 for a Single Line Telephone (SLT).OperationTo set SSD names using either a large-display or small-display phone:7. Press the HOLD key. -SSDXXX XXX displays (whereXXX = SSD bin number)8. Enter the SSD digits to be dialed.Note: Press the FLASH key to clear an entry or any exist-ing data.9. Press the HOLD key to store the entry. Next SSD bin number displays10. To set additional SSD numbers, press the volume up ordown key or press the HOLD key to move to the desiredSSD.Desired SSD bin number displays11. Repeat steps 8-10 until all SSDs are entered.12. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 79.)81-User MAINT displays2. At the 81 level, enter 02.Action Result
