92 DBS 576 (USA), issued January 1999 576-20-700Chapter 4. User Maintenance Section 700 - OperationSet Verified Account CodesDescription(For a description of Verified Account Codes, see “Verified Account Codes” on page 123.)You can enter up to 500 Verified Account codes. The System will store them in memory as validcodes. Once the codes are entered here, a Toll Restriction Service (TRS) Class of Service (COS) canbe used with each code. You can then enter your code on someone else’s phone to bypass the TRSrestrictions on that phone. (The TRS assigned to the Verified Account code will override the phone’sTRS.)OperationTo set the Verified Account code:Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 79.)81-User MAINT displays2. At the 81 level, enter 04.3. Press the HOLD key. 8104-Verified ACCD displays4. Press the HOLD key. Table Number displays5. Enter the Verified Account table number (001-500).6. Press the HOLD key. XXX-Verified ACCD displays (where XXX= account code table number)7. Press the HOLD key. 0001 : AAAAAAAAAAAXXX:Account Cod displays (whereAAAAAAAAAAA = current accountcode and XXX = account code tablenumber)8. Enter up to ten-digit Verified Account Code. (All VerifiedAccount Codes must be unique. If there is a matching entryentered, the System will not accept the entry and will doublebeep.)Note: To clear an entry or existing data, press the FLASHkey.9. Press the HOLD key. 0002 :XXXX:TRS Class displays (where X =TRS Class)10. Enter the TRS Class to be associated with the VerifiedAccount Code entry.11. Press the HOLD key to store the entry. 0001 :YYY displays (where YYY = thenext account code table number)
