282 DBS 576 (USA), issued January 1999 576-20-700Chapter 7. SLT Features Section 700 - OperationOperationTo place a call on Broker’s Hold:Hardware Requirements• N/ARelated Programming• F1-0-03: Extension COS (Hookflash Control on SLTs - Broker’s Hold or Conference)• FF3: Extension COSConsiderations• If Broker’s Hold is enabled, it is not possible to establish a conference call from an SLT position.Call ParkYou can use the Call Park function to transfer a call, even if you cannot locate the intended recipientof the call.CO, Extension, and Network calls may be parked.There are two ways for an extension to park a call on the DBS 576. One way is to park the call at thereceiving extension and to retrieve the parked call at another extension by dialing the park answercode plus the parking extension number. The other way is to park the call at another extension and dialthe park transfer answer code at the other extension to retrieve the call.OperationTo park a call on this extension:Action Result1. Pick up the first call.2. Hookflash. First call on hold3. Pick up the second call.4. Hookflash. Second call on hold, first call retrievedAction Result1. While on a call, press the hookswitch.. • Intercom dial tone2. Enter the Call Park Hold access code (default = 771).3. If necessary, page the party that needs to retrieve the call.
