258 DBS 576 (USA), issued January 1999 576-20-700Chapter 6. DSLT Features Section 700 - Operation• FF8-1-02: SSD Number• FF8-1-02: SSD NameConsiderations• The system can be programmed to allow SSD Numbers to override toll restrictions.Speed Dial LinkingYou can automatically link together up to 5 SSD numbers in 1 PSD bin to handle telephone numberslonger than 24 characters. You can then dial the entire number by pressing the programmed PSD keyor by entering the speed dial bin number.Alternatively, any combination of PSDs and SSDs can be manually linked together by pressing thekeys in the desired sequence. This can be useful for prepending account codes or long distance carrieraccess codes, etc.Note: Before linking multiple SSD numbers to a PSD bin, the SSD bins must already have beenprogrammed with the appropriate speed dial information.OperationTo link multiple SSD numbers to a PSD bin:To use a PSD that links multiple SSDs:Action Result1. Determine the SSD bin numbers to be linked2. Lift the handset or press the ON/OFF key.3. Enter the Speed Dial Set/Clear code (default = 710).4. Enter the PSD bin number (80-99).5. Press the AUTO key.6. Enter the SSD bin number (00-79 or 000-799) that containsthe first part of the number to be called.7. Repeat steps 5-6 up to 5 more times for all additional SSDsto be dialed.8. Press the HOLD key when finished.Action Result1. If necessary, select the trunk group (9, 81-8). (Normally thetrunk is selected by the speed dial numbers.)2. Press the AUTO key.3. Enter the PSD bin number (80-99).
