82 DBS 576 (USA), issued January 1999 576-20-700Chapter 4. User Maintenance Section 700 - OperationSet Personal Speed Dial NamesDescriptionFor a description of Personal Speed Dial (PSD), see “Personal Speed Dial” on page 191 for a DigitalKey Telephone, “Personal Speed Dial” on page 255 for a Digital Single Line Telephone (DSLT), and“Personal Speed Dial” on page 301 for a Single Line Telephone (SLT).OperationTo set PSD names using either a large-display or small-display phone:Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 79.)81-User MAINT displays2. At the 81 level, enter 01.3. Press the HOLD key. 8101-PSD Assignment displays4. Enter 1.5. Press the HOLD key. 1 :PSD Name displays6. Press the HOLD key. EXT Number displays7. Dial the extension number.8. Press the HOLD key. Enter PSD # XXX displays (whereXXX = dialed extension number)9. Enter the PSD bin number (80-99).10. Press the HOLD key. A B C D E F PXX displays (wherePXX = PSD number)11. Enter the PSD name:• If using a large-display phone, press the soft key nextto the desired row of letters. (See Example 1 on page83.)• If using a small-display phone press the appropriateone-touch key. (See Example 2 on page 84.)Note: Press the FLASH key to clear any existing data.12. Use the bottom row of FF keys to select a single letter.• See Example 1. Large-display phone on page 83.• See Example 2. Small-display phone on page 84.Notes:• Press the * key to erase a single entry.• Press the # key to enter a space.13. Repeat steps 11-12 as many times as necessary to enter thedesired speed dial name.Note: Press the FLASH key to clear the entire entry.
