FINAL SETUPInstallation Manual 1136.3 BACKING UP THE SYSTEMNoteBefore saving a file, we recommend that the Answer Mode of the VPS be turned off byTyping [OFLN] and then pressing ENTER. This prevents data from changing while it isbeing saved. (The system will not answer calls when off-line.)1. Choose the Utility Command. Type [SAVE], then Press ENTER. See screen output below.from System Administration Top Menu:2. To start Press [2] and then ENTER.3. Press RETURN or ENTER.Following steps are for HyperTerminal as an example.4. Select Receive File from the Transfer Menu.5. Specify a folder where data is to be saved (if necessary, use "Browse").6. Select Xmodem as the protocol to save data.7. Click "Receive".8. Enter desired filename and click "OK".The file transfer screen appears and shows download progress. Download time will varydepending on the communication speed and file sizes."SAVE Completed" will appear on the screen when the file has been saved. Continue savingthe other items as needed. It is not necessary to save the "Program" because it is resident onnter The Number : = 3tility Command$ SAVEVPS Flash Memory Data Save ( VPS -> PC : Xmodem )1: Program2: Parameters3: System Prompts4: User Prompts-15: User Prompts-26: Custom Service Menus7: Personal Greetings8: Company GreetingsSelect No. : = 2
