INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX62 Installation Manual4.3 CONNECTING THE KX-TVP50 WITH THEPANASONIC KX-TD816, KX-TD1232 AND KX-TD612NoteDo not use system programs [106] or [602] for DPT Integration. The following Section(4.3.1 KX-TD1232 Software Verification and Programming for Digital Integration via theManager's Extension) is for the KX-TD1232 as examples. Please refer to them for the KX-TD816 and KX-TD612.4.3.1 KX-TD1232 Software Verification and Programming forDigital Integration via the Manager's ExtensionIt is important that the KX-TD1232 has the proper software level to allow Digital Integrationwith the VPS. Follow the procedures below to confirm the software level, then complete therequired programming before starting up the VPS.All of the following procedures must be done after entering system programming. Referto the KX-TD1232 Installation Manual for instructions on how to enter the systemprogramming mode.Software Verification1. Verify Software - If you are configuring a 2-cabinet system, remember to check bothcabinets. The software must be the same in each. Check the software version of the KX-TD1232 using System Program [116].Example: P111GYMMDDAThe underlined digits represent the software production date code (year, month, day).NoteThe following features are not available in case the software version of the PBX islower than the required version.• Trunk Service• Caller Name Announcement (System/Personal)• Caller ID Call Routing• Personal Greeting for Caller IDIf these features cannot be used, confirm your PBX software version and consultyour dealer.From the SYS-PGM NO ? screen:a) Enter [116].b) Press the NEXT button (SP-PHONE).
