INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS52 Installation ManualMode) and [413](Lunch Mode).Exchange Line Mode — Set the mode for each applicable exchange line to Normal.Use System Programs [414](Day Mode), [415](Night Mode) and [416](LunchMode) to set this parameter.CAUTIONDO NOT create a mailbox in both VPS for the same extension. Each extension can have amaximum of 1 mailbox in either VPS. The extension should assign a Voice Mail extensionfrom the VPS which contains its mailbox as the destination for Call Forwarding and VoiceMail Transfer. DO NOT assign a Voice Mail extension from the other VPS. For example, ifjack 06 (extension 206) has its mailbox in the VPS1, assign extension 207 or 208 as thedestination, not extension 215 or 216 (see the following diagram).3.3.3 KX-TD816, KX-TD1232 and KX-TD612 Programming forInband Integration via the Manager's ExtensionSelect a maximum of 2 extension ports to be connected to the VPS. Plug each extension into aVoice Mail port.Go into System Program [602] and assign the Voice Mail extensions to a different extensiongroup. By default, all extensions are in Extension Group 1. Go into System Program [106] andassign the new Extension Group to Auto Attendant (AA). Then go into System Program [813]and assign a floating number to the new Extension Group.If your PBX is KX-TD612, KX-TD816-3, KX-TD1232-3 or higher software version, programas follows. Go into System Program [131] and enter the Voice Mail extensions into a huntinggroup. Go into System Program [106] and assign the hunting group to Auto Attendant (AA).Then go into System Program [813] and assign a floating number to the hunting group.Group B768KX-TA seriesKX-TVP50 (VPS1)Port 1Extension 207Port 2Extension 208Extension 206Mailbox for Extension 2061516Port 1Extension 215Port 2Extension 216KX-TVP50 (VPS2)Group A
