SYSTEM MAINTENANCE AND TROUBLESHOOTING120 Installation Manual2. To create a password or change an existing password, go to Step 3.To clear a password, go to Step 4.3. To create a password or change an existing password:a) Type [1] or [2]NoteWhen you press [2] to change the System Reset/Clear password you shouldtype the current (OLD) password before entering a new one.b) Type the password.c) Type the password again for verification.4. To clear a password:a) Type [1] or [2].b) Press ENTER. Do not type a password on this screen.c) Press ENTER. Do not type a password on this screen.NoteThe password entered on the screen will not appear. The VPS does notdistinguish capitals from lower cases.7.2.4 Set Time (TIME)The TIME command is used to set the system date and time. A number of system functionsrequire that the system time and date be set correctly. These functions include message waitingnotification, external message delivery, call-retries-after initial-failure-to-connect, andautomatic deletion of messages.Time Synchronisation: If you have DPT Integration between the VPS and your PBX (latestsoftware version), the date and time are automatically sent from the PBX to the VPS wheneverthe PBX sets the date and time. Also, this transfer occurs whenever DPT Integration isestablished.Maximum 10 charactersNEW PASSWORD : =Verification: =Maximum 10 charactersNEW PASSWORD : =VERIFICATION : =
