INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBXInstallation Manual 674.4 COMMON DIGITAL INTEGRATIONFEATURES AND SETUP PROCEDURESThe following features can be used on any KX-T proprietary telephone. (7000 series analogue;7200/7400/7500 series digital) KX-T7000 series are used with the KX-TA624. The KX-T7200/KX-T7400/KX-T7500 series are used with the KX-TD series.4.4.1 Live Call Screening (LCS) ProgrammingLCS notifies subscribers of incoming messages to their mailboxes. The notification method isprogrammable for hands-free or private. Hands-free allows the user to monitor a recordingthrough the speakerphone and, if desired, intercept the call by lifting the handset. The privatemode notifies the user with an alert tone when a message is being recorded. By pressing theLCS button, the user can monitor the message and intercept the call by going off-hook. SystemProgramming also determines whether the mailbox continues to record after the user interceptsthe call.4.4.2 Live Call Screening Recording Mode AssignmentThis program allows the VPS to continue recording the conversation in the mailbox after theextension intercepts the call during the Live Call Screening.1. Enter [620] (for KX-TA series) or [617] (for KX-TD series) from system program.2. Press the NEXT button (SP-PHONE).Screen output: Jack No.?3. Enter a jack number.Screen output: # _ _ :Stop Rec(_ _ = the jack number you entered)4. Press the SELECT button (AUTO-ANSWER) until the desired selection is displayed.5. Press STORE.6. Press the NEXT button (SP-PHONE).7. Repeat 4, 5, and 6 until all jacks are programmed.4.4.3 Live Call Screening Private/Hands-Free Mode AssignmentThis program assigns a VPS response for when a message is being left in a mailbox. Itdetermines whether an alert tone is sent and whether the recorded message is played throughthe built-in speaker of the extension. The default mode is hands-free. (This is station levelprogramming and should be done at each individual phone.)
