SYSTEM MAINTENANCE AND TROUBLESHOOTINGInstallation Manual 1211. Type TIME, then Press RETURN.2. Type the current time.3. Type the current date. For the year, type the last 2 digits.NoteEnter the exact time and date. This command cannot be used when either the Systemor the Message Manager is accessing the time setting feature.7.2.5 Print Reports at Specified Time (PSET)This command is used to issue system usage reports (Flash Memory Usage Report/Port UsageReport/Call Account Report) at a specified time each day by entering the PSET command. Aprinter or data terminal must be connected to the VPS at the RS-232C port for the reports to beprinted or displayed.1. Type PSET, then Press RETURN.2. Type [1] to enable this function or Type [2] to disable it.3. Type the time to print the reports.NoteThe reports will be displayed only if the system is in the mode where the ">" promptis displayed.7.2.6 Error Log Display (ELOG)This command is used when diagnosing VPS problems. When selected, this command willdisplay an error log.$ TIMECurrent time is 12:34, PMEnter new time (HH:MM, AM/PM) : =Current date is TUE 3-AUG-2002Enter new date (DD-MM-YY) : =$ PSETReport Print Out Service [ Disable ]1 : Enable 2: Disable :=Enter The Print Out Time (HH:MM, AM/PM) :=
