SYSTEM MANAGER'S GUIDEInstallation Manual 267C5 CHANGING THE SERVICE MODE SETTINGThe VPS automatically activates the appropriate call handling method according to the TimeService setting (Day, Night, Lunch, and Break Services); however, the System Manager orSystem Administrator can change the current call handling method by selecting a specificService Mode.Once the Service Mode has been changed, it is retained unless the System Manager or SystemAdministrator changes it again, even after the power is cut and restored.NoteWhile the System Administrator programmes via a personal computer, the System Managercannot change the Service Mode setting. The VPS plays "Sorry, this function is notavailable".Assigning the Service ModeThere are 6 Service Modes available:• Automatic Mode: Operates according to the setting in Time Service (default)• Manual Day Mode: Operates only in Day Mode• Manual Night Mode: Operates only in Night Mode• Manual Lunch Mode: Operates only in Lunch Mode• Manual Break Mode: Operates only in Break Mode• PBX Control Mode: Operation changes depending on PBX time period (available onlywith APT/DPT Integration)In the Automatic Mode, services have this order of priority:Holiday Service > Caller ID Call Routing > Trunk Service > Port Service(Holiday service has the highest priority.)In the Manual Modes (Day, Night, Lunch, or Break), Holiday Service is disregarded:Caller ID Call Routing > Trunk Service > Port Service(Holiday Service is disregarded.)In the PBX Control Mode: (1) under DPT Integration, the VPS obtains the Time Service (Day,Night, Lunch or Break) setting from the PBX when a call is received through a PBX andoperates accordingly; (2) under APT Integration, the VPS obtains the Time Service settingfrom the PBX when the time period changes at the PBX or APT data link has been establishedbetween the VPS and PBX.When the Integration Mode is other than APT/DPT Integration and the PBX Control Mode isselected, the VPS will operate in the Automatic Mode.
