INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX72 Installation Manual6. Exit the program mode:For KX-TA seriesSet the MEMORY switch to "SET".For KX-TD seriesPress the PROGRAM button or lift the handset.7. Repeat these steps for each telephone.4.4.11 TWT (Two-Way Transfer) into MailboxThis feature allows an extension users to record a conversation into another person's mailboxby pressing the Two-Way Transfer (TWT) button followed by the mailbox number. This iscommonly used by a person who is taking a detailed message for someone else and wants themessage recorded in the mailbox at the same time.4.4.12 TWT (Two-Way Transfer) Button AssignmentFor the Two-Way Transfer feature to work at an extension, the extension must have a TWTbutton on it. This button must be either a DSS/BLF or line key (must have a lamp). Follow theprocedure below to assign a TWT button on an extension. (This is an extension level programand should be done at each individual phone.)1. Enter Station Programming:For KX-TA seriesWith the phone on-hook, Set the MEMORY switch to "PROGRAM".(Display changes to PITS-PGM Mode.)For KX-TD seriesa. With the phone on-hook, Press the PROGRAM button.b. Dial [99]. (Display changes to PT-PGM Mode.)2. Press the desired Flexible (Line or DSS/BLF) key that you want to assign as the TWTbutton.3. Press [91] (for KX-TA series) or [84] (for KX-TD series).Screen output: 2WAY-TRANS:4. Enter a Voice Mail extension number.Screen output: 2WAY-TRANS: _ _ _(_ _ _ = The extension number you entered).5. Press STORE.6. Exit the program mode:For KX-TA seriesSet the MEMORY switch to "SET".Conditions: This button must be a CO or DSS/BLF button to beprogrammed as a TWR button. When all Voice Mailports are busy and this key is pressed, the user will hearreorder tone.
