1203-5-4 CAD ConditionOn the CAD condition screen, the conditions for setting the marking of the data created by AutoCAD and soon (DXF file) are set.Item Description Setting Range1. CAD No. Selects the registration No. of the CAD data to be markedusing the list box.1 to 152. CAD File Selects CAD file to be marked. Select file usingthe list box.3. Font Selects the font to be used for displaying the character bythe setting software and for marking by the laser marker incase that the character is used for each CAD file.Select font usingthe list box.4. Size Appoint Specifies the method of either converting read image datawith leaving the ratio between the height and width, or con-verting the data with specifying both the height and width(regardless of the ratio between the height and width).• X/Y-Same• X/Y-Appoint• X-Appoint• Y-Appoint5. Size Specifies the size of X/Y directions of the rectangle towhich a converted CAD data are circumscribed.0.03 to 50.00mm(Step: 0.01mm)6. Laser Power Revise Enables to set the correction for the laser power set on thelaser setting screen.0 to 200%7. Scan Speed Revise Enables to set the correction for the scan speed set on thelaser setting screen.50 to 200%8. Origin Specifies which part of the graphic is aligned to the origin(0, 0) of the coordinate system.Select 6 locationson a graphic.9. X/Y Position Moves the origin of the CAD file data in the X direction for theX position and in the Y direction for the Y position respectively.+/-25.00mm(Step: 0.01mm)10. Rotation Angle Rotates CAD file data around the position of the origin. Thecounterclockwise direction is the forward direction.+/-180.0 °(Step: 0.1°)11. CAD Cond. COPY Copies the whole CAD condition. -12. CAD Cond. PASTE Pastes the whole CAD condition copied to the condition withother CAD No.-13. CAD Cond. DELETE Deletes whole CAD condition. -1246789 103511 12 13
