1574-1-2 I/O Connector■ Appearance of ConnectorLase r Marker Side Co nne ctor Type : F emale D-sub 2 5 pinUser Side Co nnector Type : Male D -su b 25 pin **As a user si de conn ecto r, fo llow ing items are attach ed to thi s pro duct.[Attached i te m] User Si de Con nector : HDBB-25 P (Hi ro se El ectoric C o., Ltd.)[Attached i te m] User Si de Con nector C over : HDB-CT F (Hirose Ele cto ri c Co ., Ltd .)■ Connecting Sample (In case of operating laser marker standalone)* Example when only the file No. 1 is used. To change the files, connect the pin No. 5 to 8 and 18 to 20 (D0 to D6)to the external control device.• If not connecting the power supply (either internal power supply or external power supply) to theI/O connectors No. 14 and No. 15 , the laser marker is not activated.For activating the laser marker, connect the power supply (either internal power supply or externalpower supply).• When performing marking, connect the I/O connector No. 1 and No. 3. When setting the state between No. 1 and No. 3 into OPEN, the emergency stop isactivated and the marking becomes invalid.Be sure to connect the interlock terminals on the connecting point. (24V 500mA)• When performing marking, connect the I/O connectors No. 4 and No. 15.When setting the state between No. 4 and No. 15 into OPEN, the laser radiation is activated, andthe marking becomes invalid.• When the interlock is short-circuited from OPEN, the head panel is displayed rotationally.While the head panel is displayed rotationally, the marking ready READY becomes OFF, andthe laser marker does not perform marking.Laser Marker side User side㸨䠍䠍㻟 㻞㻝㻠㻝㻡㻝㻤㻝㻥㻞㻜㻞㻡 㻝㻟䠏䠎䠐㻡㻣㻢㻤1. INTERLOCK COM.3. INTERLOCK1. +12V2. 0V3. TRIG. IN4. LASER STOP14. IN COM.15. OUT COM.Interlock Input Terminal(Power Supply BOX)To EmergencyStop SwitchI/O ConnectorTo SensorTo Manual Door0V12VCHECKIN COM. OUT COM.INTERLOCK COM.INTERLOCKLASER STOPOUT COM.
