136(2) OncePerform the guide indication with the laser marker at one time.When the file No. under editing on the PC is also existed in the head, the following dialog box for checkingwhether the file is allowed overwriting or not is displayed (if there exists no file with the same file No. in thehead, this dialog box is not displayed).When selecting “Yes”, the file is transferred and the guide indication with red laser is started.When finishing the guide indication, the dialog box indicating “During guide indication” is closed and then thedialog box indicating the finish of the guide indication “End of guide indication” is appeared.Besides, the guide display time is also appeared.(3) CancelBy clicking this button, the guide indication is canceled.3-8-3 CautionsIt is impossible to perform the guide indication for an empty file (including no setting).Click “OK” button, re-select the file, and select the operation from either “1” or “2”.The guide indication time is the guide of the actual marking time.In case of requiring the precise marking time, perform the marking using the external control(refer to Chapter 4), and measure the time using the marking start (trigger) signal and marking endingsignal.CHECK
