1283-6-4 Adjustment of Laser Start/End PointsThe depth, shape, visibility, etc. of the marking are changed depending on the type of the target object, scanspeed, laser power, etc.By using this function, the depth at the start/end points can be reduced and the marking shape can beadjusted.• Laser start point adjustmentAdjusts the timing for turning on the laser at the start point.The smaller the value is, the darker (deeper) the marked character at the start point is.Dark (deep) Proper Light (shallow)50 150Setting Range: 50 to 150Initial Value : 100• Laser end point adjustmentAdjusts the timing for turning off the laser at the end point.The larger the value is, the darker (deeper) the marked character at the end point is.Light (shallow) Proper Dark (deep)50 150Setting Range: 50 to 150Initial Value : 100Light (shallow) Proper Dark (deep)
