Specifications102 - ENGLISHAppendixSpecificationsThe following table describes the specifications of the projector.Model No. PT-EX16KE/PT-EX16KUPower supply AC 220 V - 240 V 50 Hz/60 HzPower consumption220 V - 240 V 11 A 1 850 WWhen [Lamp power] in the [Setting] menu is set to eco-mode: 1 450 WStandby: 18 WLCD panelSize 4.57 cm (1.8") (aspect ratio 4:3)Display system Three transparent LCD panels (RGB)Drive system Polysilicon TFT active matrix systemNumber ofpixels 786 432 pixels (1 024 x 768 dots) x 3 panelsLuminous lamp 380 W NSHA UHM lamp x 4Light output 16 000 lm (ANSI) (when [lamp select] is set to [4-Lamps] and [Lamp power] is set to standard)Image signals that can be projected Refer to “List of compatible signals” ( page 99).Color system Six standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM)Screen size 1.02 m (40") – 15.24 m (600")Screen aspect ratio 4:3Projection method Refer to “Projection method” ( page 24).Contrast ratio 2 500:1 (when setting [Lamp power] to auto, and [Advanced color] to [Auto])TerminalsINPUT 1DVI-D inputterminal1 set, DVI-D 24 pDigital signal TMDS (Transition Minimized Differential Signaling)HDMI inputterminal 1 set, HDMI 19 pin (HDCP, Deep color compliant)COMPUTERinput terminal1 set (D-sub 15 p (female))RGB signal 0.7 V [p-p] 75 Ω (G-SYNC: 1.0 V [p-p] 75 Ω)HD/SYNC TTL high impedance, automatic positive/negativepolarity compatibleVD, TTL high impedance, automatic positive/negative polaritycompatibleINPUT 2Analog RGBinput terminal1 set (BNC 5 p)RGB signal 0.7 V [p-p] 75 Ω (G-SYNC: 1.0 V [p-p] 75 Ω)HD/SYNC TTL high impedance, automatic positive/negativepolarity compatibleVIDEO signal 1.0 V [p-p] 75 Ω negative syncY P B/CB PR /CR signal Y: 1.0 V [p-p] negative sync, PB/CB : 0.7 V [p-p] 75 Ω, PR /CR :0.7 V [p-p] 75 ΩS-VIDEO inputterminal 1 set, Mini DIN 4 p Y 1.0 V [p-p], C 0.286 V [p-p] 75 Ω S1 signal compliantSerial input terminal D-Sub 9 p 1 set, RS-232C-compatible computer controlUSB terminal (used byservice personnel) USB connector (1 set, series B)Wired remote control Mini jackLAN terminal 1 set, RJ-45 for network connection, PJLink compliant, 10Base-T/100Base-TX