Panasonic PT-EX16KE Operating Instructions Manual

Contents

About indicator status78 - ENGLISHMaintenance■■ When operating correctlyThe status of the indicator is displayed with the following symbols.s: Off, l: On, H: Flashing, ■: On or FlashingIndicatorStatus of the projectorGreen

BY>RedTEMP.>RedFILTER>OrangeBlueREPLACE>Oranges s s s s s The power plug has been removed from the outlet.s l s*1 ■*1 ■*1 ■*1The projector is in the standby mode.Turns on when pressing the power button onthe remote control or the power button on the control panel.l s s*1 ■*1 s ■*1 The projector is operating normally.s H*2 s*1 ■*1 ■*1 ■*1The lamp is cooling down.The projector does not turn on when pressing thepower button on the remote control or thepower button on the control paneluntil the standby indicator changes toon.H*2 l s*1 ■*1 s ■*1The projector is in the power management mode.The lamp will turn on when controlling the projector,allowing the user to start operating it.H*2 H*2 s*1 ■*1 s ■*1 Power management mode is ON and the lamp iscooling down.l s s*1 ■*1 l ■*1The shutter function has been turned on.Press any button on the remote control or the controlpanel to cancel the function.s l s ■*1 H*2 ■*1The projector is in the shutter management mode.The lamp will turn on when controlling the projector,allowing the user to start operating it.s H*2 s ■*1 H*2 ■*1 Shutter management mode is on and the lamp iscooling down.*1: The indicator will turn on or flash under certain conditions, regardless of the status of other indicators.*2: The indicator will flash in approximately 1-second intervals.