[Screen] menu56 - ENGLISHSettings[Custom]The image is projected using the values registered as[Store] in the [PC adjust] menu.zWhen there is no input signal, [Custom] can beselected but the image will be projected in [Normal]mode.1)Press▲▼to select [Custom].2)Press the [Custom adj.]Adjusts the horizontal and vertical scale and position.zWhen there is no input signal, this item is grayedout and cannot be selected.zIf the input signal is lost during adjustment, theadjustment value is stored and the [Aspect]adjustment screen is cleared.1)Press▲▼to select [Custom adj.], andpress▶.■zThe adjustment screen of the sub menu 2 isdisplayed.2)Press▲▼to select an item, and pressthe 3)The advanced menu is displayed.■zTo adjust [H&V], press the and adjust on the sub menu 2 screen.■zPress the [Reset]. Select [Yes] and press the button.■zWhile the advanced menu is displayed, press▲▼to display menus other than [H&V],[Common] and [Reset] in order.4)Press◀▶to adjust the setting.■zPress the sub menu.[Scale H]Adjusts the horizontal scale.[Scale V]Adjusts the vertical scale.[H&V]When adjusting the vertical andhorizontal scale, select [On] to linkthe vertical and horizontal scalesand preserve the aspect ratio of theimage.zAs you adjust the numerical valueof [Scale H], the numerical valueof [Scale V] changes accordingly.[Position H]Adjusts the horizontal shift.[Position V]Adjusts the vertical shift.[Common]Applies the adjusted content to allinputs.[Reset]Resets all the adjusted content.[Digital zoom +]1)Press▲▼to select [Digital zoom +].2)Press the ▶.■zThe menu screen is cleared and [Digital zoom +]is displayed.3)Press the ■zEach press of the button enlarges the image.■zPress▲▼◀▶to move the image.■zThe image move function only works when theimage size is larger than the panel resolution*1*1:The panel resolution of the projector is 1 024 x 768 dots.NotezWhen there is no input signal, [Digital zoom +] isgrayed out and cannot be selected.zWhen [True] is selected, [Digital zoom +] cannot beselected.zTo end the [Digital zoom +] operation, press anybutton other than the , ▲▼◀▶buttons.