About your projector20 - ENGLISHPreparationAttentionz Do not drop the remote control.z Avoid contact with liquids or moisture.z Do not attempt to modify or disassemble the remote control.Notez The remote control can be used from any distance within about 5 m if pointed directly at the remote controlsensor. The remote control is effective from angles of up to ±30° vertically and horizontally, but its range maybe reduced.z If there are any obstacles between the remote control and the remote control sensor, the remote control maynot operate properly.z You can control the projector by reflecting the signal off the screen, but the effective operating range willdepend on the characteristics of the screen.z If the remote control sensor receives strong light such as fluorescent light, the remote control may not operateproperly. Place the projector as far as possible from other light sources.Projector body(2) (3) (4) (5) (6) (7) (8) (9) (7) (12) (13)(14) (10) (11) (7) (7) (15)(1) (10) (11) (15) (16) (15) (15)(1) Lens attachment cover(2) Air filter unit(3) Lens (optional)(4) Indicator ( page 77)(5) Remote control sensor (top and front)(6) Connection terminals ( page 22)(7) Carry handle(8) Security slotThis security slot is compatible with the Kensingtonsecurity cables.(9) Control panel ( page 21)(10) Air exhaust port(11) Lamp coverHouses the lamp unit. ( page 86)(12) AC input terminalConnect the supplied power cord. ( page 31)(13) Main power switchTurns off/on the main power.(14) Remote control sensor (rear)(15) Adjustable feetAdjust the projection angle. ( page 25)(16) Air intake portAttentionz Keep your hands and other objects away from the air exhaust port–■Keep your hands and face away.–■Do not insert your fingers.–■Keep away heat-sensitive articles.Heated air from the air outlet port can cause burns, injuries, or deformations.