[Screen] menu58 - ENGLISHSettings■■[Corner pattern]Selects the corner pattern mode displayed duringcorner correction.1)Select [Corner pattern], and press the■zThe setting screen is displayed.2)Press▲▼to select an item.[Red]Displays the corner pattern in red.[White]Displays the corner pattern in white.[Blue]Displays the corner pattern in blue.[Off]Clears display of corner pattern.■■[Store]Stores the correction state.1)Select [Store], and press the2)Press▲▼to select an item, and pressthe [Store]The adjustment state remains inmemory even after removing thepower cord.[Reset]The adjustment state is reset whenthe power cord is removed.■zYou can register only one of [Standard] and[Corner correction].[Ceiling]Sets the projection method in accordance with theinstallation status of the projector.If the screen display is upside down, select [On].zThis setting is used when the projector isinstalled using the ceiling mount bracket (optionalaccessory).1)Press▲▼to select [Ceiling].2)Press the 3)Press▲▼to select an item.[Off][On][Rear]Sets the projection method in accordance with theinstallation status of the projector.If the screen display has flipped, select [On].1)Press▲▼to select [Rear].2)Press the 3)Press▲▼to select an item.[Off][On][Reset]The setting returns to its value before adjustment .1)Press▲▼to select [Reset].2)Press the 3)Select [Yes], and press the button.■zThe setting returns to its value beforeadjustment.■zSelect [No] and press the return to the sub menu.