Panasonic PT-EX16KE Operating Instructions Manual

Contents

About indicator statusENGLISH - 81 Maintenance■■ When there is a problem with the lampThe status of the indicator is displayed with the following symbols.s: Off, l: On, H: Flashing, ■: On or FlashingIndicatorStatus of the projectorGreen

BY>RedTEMP.>RedFILTER>OrangeBlueREPLACE>Orange■*1 ■*1 ■*1 ■*1 ■*1 H*2Either of the lamps do not turn on. (The lamp is coolingdown. After the standby indicator turnson again, press the power button on the remotecontrol or the power button on thecontrol panel.)■*1 ■*1 ■*1 ■*1 ■*1 H*3Either of the lamps do not turn on. (The lamp hascooled, and returned to operating temperature.Pressing the power button on the remotecontrol or the power button on thecontrol panel will make the indicator stop flashing andoperate the projector.)■*1 ■*1 ■*1 ■*1 ■*1 lThe recommended time to replace the lamp has beenreached.The will be displayed at the top right of the screento notify the user of replacement.Replace the lamp unit as soon as possible. Replacingthe lamp will cause the lamp indicator REPLACE> to turn off.*1: The indicator will turn on or flash under certain conditions, regardless of the status of other indicators.*2: The indicator will flash in approximately 0.5-second intervals.*3: The indicator will flash in approximately 2-second intervals.Notez The status of each lamp can be checked as the lamp indicators ( to REPLACE>) at the top of the projector turn on or flash. ( page 85)