[Setting] menu62 - ENGLISHSettings■■To display the test pattern1)Press▲▼to select [Test pattern].2)Press the 3)Press▲▼to switch the setting.■zPress the mode.[Off]Clears display of test pattern.[On]Displays the test pattern.■■Not to display the menusThe settings screen and lines are clearedtemporarily.1)Press▲▼to select [Menu off].2)Press the ■zPress any button to return to the setting screen.■■To reset a value duringadjustmentThe setting returns to its value before adjustment .1)Press▲▼to select [Reset].2)Press the ■zA screen for confirming whether to reset isdisplayed.3)Select [Yes], and press the button.■zThe confirmation screen is displayed.4)Select [Yes], and press the button.■■To return to the sub menuReturns projector to the sub menu.1)Press▲▼to select [Back].2)Press the [Color matching]Makes it less easy to see different projector coloringwhen multiple screens are used.1)Press▲▼to select [Color matching].2)Press the ■zDisplays [Color matching] setting screen.3)Press▲▼to select [Color matching].4)Press the 5)Press▲▼to select [On].■zWhen not performing [Color matching],select [Off]. Items other than [Advanced colormatching] will be grayed out and cannot beselected.6)Press the ■■To adjust the color1)Press▲▼to select the color to adjust.2)Press the 3)Press▲▼to change the value, andpress◀▶to move between digits.■zThe numerical values can also be entered usingthe number (<0>-<9>) buttons of the remotecontrol.■zThe numerical value changes according tothe value of [Color temp.] in the [Image adjust]menu.Colorxy[Red]0.000 - 1.0000.000 - 1.000[Green]0.000 - 1.0000.000 - 1.000[Blue]0.000 - 1.0000.000 - 1.000[White]0.000 - 1.0000.000 - 1.000