[Setting] menuENGLISH - 71Settings■■[Effect]Sets special effects when shutter is opened andclosed.1)Select [Effect], and press the■z▲▼are displayed over the sub menu 2.2)Press▲▼to select an item.[Off][L 1][L 2][Off]Turns off special effect.zFactory default setting[L 1]Sets fade in and fade out when theshutter is opened and closed.[L 2]Sets slower fade in and fade outthan L1.■■[Release key]Sets the release button when shutter is closed.1)Select [Release key], and press the■z▲▼are displayed over the sub menu 2.2)Press▲▼to select an item.[Any][SHUTTER][Any]The shutter function is canceledby pressing any button except the button on the remotecontrol, and the function of thepressed button is executed.[SHUTTER]Only the button on theremote control or the control panelcan be canceled.NotezIf the power is turned on again after the power isturned off during the setting or the lamp is turned offwith the [Management] setting, the shutter functionis canceled.zThe setting of the selected item is enabled.■■[Management]Sets a time between closing of the shutter and thelamps turning off.1)Select [Management], and press the■z▲▼are displayed over the sub menu 2.2)Press▲▼to select an item.■zYou can set times from 5 - 480 minutes.NotezWhen the management function is active, the lampis turned off and the projector will begin a coolingoperation.zWhen cooling has finished, the power of theprojector body is turned off and the standbyindicator turns on.zThe shutter indicator begins flashingin blue as the cooling operation begins.zThe flashing continues after the cooling hasfinished and the standby indicator has turned on.zThe flashing stops when the projector power isturned on again.zThe power management function does not workwhen the image is blocked by the [Shutter].zThe factory default setting is “180 minutes”.zYou cannot set the time while the function is off.[Video delay control]Sets when you want to speed up digital processing ofthe images being projected.1)Press▲▼to select [Video delaycontrol].2)Press the 3)Press▲▼to select an item.[Off][Low][High][Mid]NotezThe speed of digital processing increases through[Low], [Mid], and [High].zWhen each item is selected, the following items aregrayed out and cannot be selected.[Low]z[Keystone] of the [Screen] menu[Mid]z[Progressive] and [Noisereduction] of the [Image adjust]menu[High]z[Keystone] of the [Screen] menuz[Progressive] and [Noisereduction] of the [Image adjust]menu