Panasonic PT-EX16KE Operating Instructions Manual

Contents

[Setting] menu70 - ENGLISHSettings■■ [PIN code change]Changes the logo PIN code.1) Select [PIN code change], and pressthe button.■z If the PIN code is accepted, the new logo PINcode is displayed on the screen.5) Press ▲▼◀▶ or the number (<0> -<9>) buttons to set your new PIN code.6) Press the button.■z If the PIN code is accepted, the projectorreturns to the sub menu 2.Notez To re-enter a number, press ◀▶ to select the digitto re-enter, then press ▲▼ or the number (<0> -<9>) buttons to re-select the number.z Move the cursor to [Cancel] and press the button.3) Press ▲▼ to select an item.■z The factory default setting is [ALL].[ALL]Makes projector accept operationsregardless of any ID numberspecified by the remote control orPC.1 - 64 Sets ID numbers from 1 - 64 to theprojector.[Shutter]Sets the shutter function.1) Press ▲▼ to select [Shutter].2) Press the button.■z ▲▼ are displayed over the sub menu 2.2) Press ▲▼ to select an item.■z The setting will change as follows each timeyou press the button.Protection is off.Operation can be made from bothremote control and projector.Locks operations from the remotecontrol.Locks operations from the controlpanel.Locks operations from both theremote control and the control panel.