[Image adjust] menu52 - ENGLISHSettings[Color temp.]1)Press▲▼to select [Color temp.].2)Press the ■zThe advanced menu is displayed.■zWhile the advanced menu is displayed, press▲▼to move backwards and forwards betweenmenus.3)While looking at the screen, press◀▶to adjust the setting.OperationAdjustmentRangePress▶.Makes the colortemperaturehigher.[XLow]-[Low]-[Mid]-[High]Press◀.Makes the colortemperaturevery low.Notez[XLow] (emphasize red) - [High] (emphasize blue)zNote that adjusting this item will also change thewhite balance setting.z[Adj.] is displayed when you adjust the whitebalance (any of [Red], [Green], and [Blue]).White balance ([Red]/[Green]/[Blue])1)Press▲▼to select [Red] (or [Green]or [Blue]).2)Press the ■zThe advanced menu is displayed.■zWhile the advanced menu is displayed, press▲▼to move backwards and forwards betweenmenus.3)While looking at the screen, press◀▶to adjust the setting.OperationAdjustmentRangePress▶.Weakens the color.Maximumvalue 63Press◀.Deepens the color.Minimumvalue 0[Offset]1)Press▲▼to select [Offset].2)Press the ▶.■zThe sub menu 2 is displayed.3)Press▲▼to select [Red] (or [Green]or [Blue]).4)Press the 5)While looking at the screen, press◀▶to adjust the setting.[Red]Minimum value 0 - maximum value 63[Green]Minimum value 0 - maximum value 63[Blue]Minimum value 0 - maximum value 63[Auto picture control]Emphasizes the dark parts of the projected image.1)Press▲▼to select [Auto picturecontrol].2)Press the 3)Press◀▶to switch the setting.■zThe setting will change as follows each timeyou press the button.[Off][L 1][L 2]■zThe effect is strongest with [L 2].[Advanced color]Sets the operation of the color control device thatindependently controls the quantity of yellow light.1)Press▲▼to select [Advanced color].2)Press the 3)Press◀▶to switch the setting.■zThe setting will change as follows each timeyou press the button.[Off][Auto]■zThe white balance may change depending onthe image.